Kimler Sidebar Menu
Kimler Adventure Pages: Journal Entries
Woodshed Project (Completed)
It takes time to create blog entries and not everything that happens, merits an entry. So, we've created this 'news' section, to keep readers up-to-date with our misadventures and accomplishments. Read about it here FIRST, before it makes it into a blog entry.
NewsBrief: [2nd Woodshed] Scott finishes the second woodshed amid project cost overruns & contractor delays. So much for "free" and "in one day"! ...
Woodshed Project Completed Amid Cost Overruns & Delays
Hutton House - Reporters walked around the newly constructed Hutton House woodshed number two. Originally meant to be made from completely recycled materials, Scott and Rachel opted to add plywood sides and a metal roof (since the original plan - no sides and a tarp roof - leaked like a sieve!)
"We are happy to have the second shed," said Scott, "Though it ended up costing more and taking longer to build than originally planned."
"It's now stocked nearly to the brim with milling debris, left over from when we bought the property. Yay! After four years, the pasture is finally 'clear'!" shouted Scott. (Mind you, Scott cut so much firewood last year that there is now a 4-year supply, stacked in wind-rows to dry - in the pasture!)
The original 'plan' for the second woodshed was to build it using 100% recycled materials and do it in one day. Though the project got off to a good start, it took longer to move the fence than originally planned and the project ended up taking two days, rather than one.
The "recycled" woodshed had no sides and only a (used) tarp for a roof. Upon closer inspection, it turned out that the tarp had a fair number of small holes, which Scott tried to seal using some 'Tuck Tape'.
Immediately after completion of the "recycled" woodshed, the weather turned inclement and it proceeded to rain for several days. Much to Scott's disappointment, the tarp leaked like crazy. It became obvious that a tarp roof wasn't going to cut the mustard. A trip to the building supply center was required.
The project took a more expensive turn, as we headed to Home Depot to purchase 1x6 slats, 10-foot painted, corrugated tin roofing, metal drip strips, 7 sheets of half-inch plywood and a variety of screws. Cost? $400 ... nearly 'on the nose' (or is that 'on the chin'?)
Like most public works projects, this one suffered from delays - at least the workers didn't strike! (all one of them) - and budget overruns! LOL ... We'll leave it to you to figure out the percentage overrun from $0 to $400. Ha!
Despite the overruns and delays, the project was finished within a month and that included an extra day day to move and stack nearly three cords of (soaking wet, recycled) cedar wood into the new shed. The woodshed creaked and groaned as it was filled with wet wood. Three full rows and a partial 4th row meant that the woodshed was nearly full.
"That should be enough kindling to last us for 5 years," said Scott.
Even though the woodshed is complete, it's not really. Because most of the cedar wood that was loaded into the shed is wet, Scott purposefully left off the back of the shed, so that air could circulate and allow the wood to dry. The new shed also need a few trim pieces and - of course - a paint job.
"Add that to my list of summer projects," said Scott, sarcastically.